Premium Kooshy Kloud Instructions
☁️ Premium Kooshy Kloud Instructions
The most versatile comfort cushion for parents, babies, and older kids—now with added safety features.
🔄 Know Your Kloud
This is the Premium Kooshy Kloud, featuring an upgraded Air Safety Release Valve for added in-flight safety and comfort.
It includes:
-
A deflation valve with two settings: inflation and deflation (this is grey)
-
A safety valve to regulate pressure during flight (this is black).
-
Soft, non-toxic materials and a compact, lightweight design
-
Lifetime warranty
🧳 Preparation
Inflate & Test
-
Remove the Kloud from its packaging
-
Peel back the first layer of the grey deflation valve (the inner flap, not the full base)
-
Inflate using 6–10 short breaths
-
The Kloud should be only half-inflated
-
It may look underfilled at first — this is intentional
-
When pressure is applied (from a body or seat), it expands to the perfect level
-
Over-inflation makes the Kloud too rigid, uncomfortable, and oversized for airline seats
-
🧒 Using the Kloud
For Infants (on your lap)
-
Once half-inflated, place the Kloud around your waist
-
It will sit comfortably across your lap
-
You can rest your arms on it while your baby lays across you for sleep or breastfeeding
-
Always use a seatbelt extender when using the Kloud this way
-
⚠️ WARNING: Never use the Kloud for lap sleep without a seatbelt extender
For Toddlers & Older Kids (in their own seat)
-
Place the Kloud behind the child in the seat so it wraps around them
-
The Kloud acts as a soft cocoon, helping reduce stimulation and creating a secure sleep environment
-
Again, only inflate halfway to keep it soft, flexible, and properly sized
🔧 Valve & Inflation Details
-
Inflation Valve:
-
Peel open the top flap only (not the full base)
-
Inflate using your mouth only (a pump is not recommended)
-
Do not open the hole fully during inflation—air will escape too quickly
-
-
Deflation Valve:
-
Pull open the base flap completely to expose the inner hole
-
Air will release quickly
-
Press and roll to remove remaining air before folding
-
-
Air Safety Release Valve ( Black):
-
Twist fully clockwise to close
-
Then back it off just slightly (~2cm) to enable the automatic pressure-release feature
-
This allows the cushion to gently adjust to cabin pressure mid-flight
-
Don’t forget to re-tighten fully before folding away
-
🧳 Deflation & Packing
Step 1: Open Valve
-
Pull the base of the deflation valve until the hole is fully exposed
-
Air will begin to escape immediately
Step 2: Compress
-
Gently press or roll the Kloud to push remaining air toward the open valve
-
Continue pressing out air as you fold it down
Step 3: Seal & Store
-
Close the valve completely and fold the Kloud for storage
-
Ensure the Air Safety Release Valve is also sealed tightly for compact packing
💡 Troubleshooting
Overfilled or too stiff?
-
Open the valve slightly and release a bit of air
-
The Kloud is meant to feel soft and squishy—not rigid
Losing air?
-
Check that both valves are fully sealed
-
Re-tighten the Air Safety Valve (twist clockwise)
-
Some softening during long-haul flights is normal—just top it up if needed